ANNEXURE-1

RATE & SPECIFICATIONS FOR CONSTRUCTION ON TURNKEY BASIS

Our Rate for Full Work Starts from

Rs.1400/- Per Sq.Ft & May go upto Rs.2000/-

depending on the Location, Plinth Area, Front Elevation Designs & Roofing Pattern.

Our Full Work Contract Rate per Sq.Ft would get fixed between this range of Rs.1600/- & Rs.2000/-; Depending on your Location, Plinth Area, Elevation & the Roofing Pattern you choose to construct your Home. Whatever may be the rate; all the below given Specifications would remain the same and therefore the Full & Final Rate can only be confirmed after you finalize the floor Plan and the Elevation of your proposed Home. If you need more information on our rates; please don’t hesitate to call our 24/7 Helpline Number: +91-9597296772

EARTH WORK EXCAVATION:

Foundation Trenches, for all clauses of soil including cutting, Shoring, Strutting, dewatering etc.
For column Foundation : 120 x 120 x 120 cm in Size
Rubble Foundation : 60 x 60 cm in Size

PCC BELOW COLUMN FOUNDATION:

Plain Cement Concrete 1:4:8 using 20MM downgraded aggregates as per Standard Architectural Specification.

RCC COLUMN FOOTING:

Reinforced Cement Concrete 1:2:4 using 20MM as per Standard Architectural Specification.

RR FOUNDATION WORK:

60cm x 60cm fitting and packing of Rubble with available soil.

RR BASEMENT:

45cm x 45cm fitting and packing of Rubble in cement mortar 1:6 as per Standard Architectural Specification.

RCC BELT:

Reinforced Cement Concrete in 1:2:4 as per Architectural Drawings, Size shall be 45 x 10 as per Standard Architectural Specification.

FILLING IN BASEMENT:

Filling in basement shall be done with available Red Earth or Slurry Dust.

LATERATE (CHENKALLU) WORK:

Good Quality Laterate Masonry in 20cm thick; Cement Mortar in 1:6 - Client may opt for Good Quality Semi Wire-Cut Brick instead of Laterate; @Rs.60/- Extra/Sft

PARAPET WORK:

Single Brick Work shall be used for the Parapet Work.

PCC BELOW FLOORING:

Plain Cement Concrete 1:4:8 as per Standard Architectural Specification.

RCC COLUMNS:

RCC shall be build using 20mm Downgraded aggregates in M20 Mix as per the given structural drawings.

RCC BEAMS:

RCC Beams shall be build; using 20mm Downgraded aggregates in M20 Mix as per the given structural drawings.

RCC SLABS:

RCC Slabs with minimum 10CM thickness shall be build; using 20mm Downgraded aggregates in M20 Mix as per the given structural drawings.

RCC SUN SHADES:

RCC Sun Shades shall be build; using 20mm Downgraded aggregates in M20 Mix as per Standard

RCC STAIRS:

RCC Stairs shall be build; using 20mm Downgraded aggregates in M20 Mix as per Standard Architectural Specification

RCC LINTEL:

RCC Lintel shall be build; using 20mm Downgraded aggregates in M20 Mix as per the given structural drawings.

REINFORCED STEEL:

Fixing Steel Reinforcement (High Yield Strength Deformed Bars Conforming to Fe 500) for R.C.C in all items, Work including transporting, recoiling, cutting, straightening, bending and placing in position at all levels & binding with approved gauge binding wire.

CEMENT:

43 Graded Ordinary Portland cement or Portland Pozzolana Cement of Dalmia, Chettinadu, Ramco, Malabar or Equivalent shall be used for all the works.

SAND:

Good Quality Crushed M-Sand (POABS) shall be used for all RCC and Super Structural Works, Good Quality River Sand or Crushed M-Sand which is specially graded for the plastering purpose shall be used for all plastering works as per the availability in the open Market.

JOINERY WORK (FRAMES WITH FLAT & RODS):

Good Quality Imported Hard Wood (Merbau) shall be used for all the windows and Door Frames in size of 10cmX 6.5cm. However the GF front door frame shall be in size of 15cm X 10cm. All window frames shall be secured with Flat & 12 MM Rods. For all Paneled and Glazed Shutters also Good Quality Imported Hard Wood (Merbau) shall be used.

INSIDE PLASTERING WORK:

Inside Plastering Work shall be in Cement Mortar 1:6, 9 to 12 MM Thick

CEILING PLASTERING WORK:

Ceiling plastering work shall be in 1:3 Cement Mortar, below 10MM Thick.

OUTSIDE PLASTERING WORK:

Outside wall Plastering Work shall be in Cement Mortar 1:5, 12 to 15 MM Thick.

HANDRAILS:

Stainless Steel Handrails shall be used in Staircase Areas and upper living Cut-Off Areas.

ELECTRICAL WORKS:

Cables : Finolex or V.Guard Switches & Sockets : Modular Switches & Sockets from Hawells Final Fittings such as Fancy Lightings & Ceiling Fans should be provided by the Client at Site.

CAR PORCH TILES:

Good Quality tiles shall be used. (Choice of Design, Colour & Brand as per the Client; Priced at Maximum Rate of Rs.50/- per Sq.Ft)

PLUMBING AND SANITARY WORK:

ROOFING TILES (FOR SLOP ROOFS ONLY):

Good Quality Terra Cotta Roofing tiles shall be used. (Choice of Design, Colour & Brand as per the Client; Priced at Maximum Rate of Rs.25/- per Sq.Ft)

CEMENT ORNAMENTAL DESIGN WORKS ON ELEVATION:

As per Elevation; all the cement ornamental works shall be accomplished.

FLOORING TILES:

Hi Gloss Nano Technology 60cm x 60cm Vitrified Tiles shall be used for all Carpet Areas; Except Bathrooms. (Choice of Design, Colour & Brand as per the Client; Priced at Maximum Rate of Rs.50/-per Sq.Ft)

SKIRTING TILE WORK:

Hi Gloss Nano Technology Vitrified Tiles shall be used for all Skirting portions (10Cm Height).

KITCHEN DADOING WALL TILES:

Dadoing tile Works shall be done above the kitchen slab with Good Quality tiles (Size: 45 x 30 Cms) (Choice of Design, Colour & Brand as per the Client; Priced at Maximum Rate of Rs.60/- per Sq.Ft)

KITCHEN TOP:

Good Quality Granite Slabs Shall be used for the Kitchen Top. (Priced at Max.Rate of Rs.200/- per Sft)

BATHROOM FLOORING TILES:

Good Quality Anti-Skid Tiles shall be used for all Bathrooms. Size: 30 x 30 Cms. (Choice of Design, Colour & Brand as per the Client; Priced at Maximum Rate of Rs.45/- per Sq.Ft)

BATHROOM WALL TILES:

Good Quality Bathroom Wall Tiles (Size: 45 x 30 Cms) of High lighter Model upto a maximum height of 7 Feet shall be Used (Choice of Design, Colour & Brand as per the Client; Priced at Maximum Rate of Rs.50/- per Sq.Ft)

BATHROOM DOORS:

All Bathroom Doors Shall be done using Branded Fiber Doors. (Choice of Design, Colour & Brand as per the Client; Priced at Maximum Rate of Rs.4000/- per Door)

WOODEN POLISH:

All Wooden Surfaces shall be polished with Good Quality sealer, Wood Stainer and over coat shall be cleared with Melamine.

PUTTY WORKS:

Putty works shall be done in all the interiors areas and also on the Exterior front Elevation Areas. (Brand: Asian, Birla or JK Wall Putty)

PAINTING WORK:

Single Coat White Cement Washing shall be used all over the Plastered Area, Two Coats of Acrylic Emulsion shall be used all over the white washing Area including one coat of Cement Primer. Two coats of Asian Paints Apex Brand shall be used for all external Walls and two coats Asian Paints Regular emulsion shall be used for all internal Walls.

FRONT DOOR – BED ROOM DOORS – KITCHEN DOORS:

Front Door, Bed Room Doors and Kitchen doors shall be made with Standard Size of Good Quality Imported Hard Wood (Merbau). For Kitchen Door we provide Decorative Glass Doors (Half Wood with Half Hitched Decorative Glass)

GRILL WORK:

In Work Areas or Fire Kitchen Area; Wall Grills shall be provided using MS-Rods.

WOODEN FITIINGS:

All Wooden Fittings like Hinges, Tower Bolts and Mortise Lock shall be provided from Branded Companies having Stainless Matt Finish. Whereas the Front Door Fittings shall be of Brass. (Max.Rate for Front Door Lock: Rs.3000/- and All other Door Locks: Rs.1000/-)

SMOKELESS OVEN:

Standard size of Smokeless Oven shall be mounted in the Fire Kitchen Area.

ANTI-TERMITE TREATMENT:

Against attack by subterranean termites; Chemical Treatment shall be implemented by experts having special know-how to ensure uniform distribution and proper penetration.

SEPTIC TANK & WATER DRAINAGE SOCK PITS:

Septic Tank & Water Drainage Sock Pits shall be made as per the standard Size & Capacity.